3D Angles

Investment Blog featuring discussion and commentary on market conditions, stocks, and recent news with an emphasis in 3D printing.

New Seeking Alpha Wal-Mart Article

Check out my new Wal-Mart article exclusively available at Seeking Alpha:


New 3D Systems Article

My article about my take on the new secondary offering for 3D Systems has just been published. It is exclusively available at Seeking Alpha:


3D Printing Stocks Coverage List

The list below includes stocks that I believe will or should be impacted by 3D printing. This is neither a list full of “buy” recommendations nor is it a list of every company that is currently or rumored to be involved in 3D printing. I have omitted companies that I strongly suspect of being scams. The list is below:

1) Apple Inc. (AAPL)

2) Autodesk, Inc. (ADSK)

3) Alphaform AG (AFRMF)

4) Arcam AB (AMAVF)

5) ARC Group Worldwide, Inc. (ARCW)

6) Camtek Ltd. (CAMT)

7) Cimatron Ltd. (CIMT)

8) 3D Systems Corp. (DDD)

9) Ekso Bionics Holdings, Inc. (EKSO)

10) M.G.I. France Soci (FRIIF)

11) General Electric Company (GE)

12) Groupe Gorge SA (GGRGF)

13) Google Inc. (GOOG)

14) Hasbro Inc. (HAS)

15) Hewlett-Packard Company (HPQ)

16) The Hershey Company (HSY)

17) Ikonics Corp, (IKNX)

18) Intel Corporation (INTC)

19) Lomiko Metals Inc. (LMRMF)

20) Organovo Holdings, Inc. (ONVO)

21) RTI International Metals, Inc. (RTI)

22) ScanSource, Inc. (SCSC)

23) Sigma Labs, Inc. (SGLB)

24) Staples, Inc. (SPLS)

25) Stratasys Ltd. (SSYS)

26) Voxeljet AG (VJET)

27) Wal-Mart Stores Inc. (WMT)

28) The ExOne Company (XONE)

29) Zecotek Photonics Inc (ZMSPF)

*I also plan to start writing about oil fracking. I have not decided whether or not I will combine the two pages or make a separate page, but it should be exciting. I have been covering both fracking and 3D printing for nearly a year and look forward to continue to share my views and findings on both topics.

Savvy Swing Traders Could Capitalize On Voxeljet’s Volatility

A little more than 7 months ago, on October 17, 2013, Voxeljet AG (VJET) held its initial public offering. 6.5 million shares were sold at $13. It took less than a month for share price to peak at $70 (a gain of more than 500%). From mid-November of 2013 to early March of 2014, the share price was partially corrected and found relative stability between $32 and $45 per share. Beginning in early March, Voxeljet investors seemed to slowly realize their stock was still extremely overvalued and share price continued to roll down. The bleeding finally stopped around April 14, when share price settled around the $15 price of a 3 million share secondary offering.

Despite its exceptionally large 6 month boomerang, many investors are still unfamiliar with Voxeljet. Headquartered in Friedberg, Germany, Voxeljet AG is a provider of 3D printers and on-demand parts services for commercial and industrial customers. Despite its brand new status as a publicly traded company, Voxeljet has been developing its technologies since the company was founded in 1999. Voxeljet’s large industrial machines have provoked the imaginations of scientists, engineers, and bullish investors.

Valuation Presents a Dilemma

A quick look at Voxeljet’s potential in efficient manufacturing with machines such as the VX500 may lead investors to a more bullish valuation. A look at Voxeljet’s potential in the construction industry and the mammoth build space of its VX4000 may cause investors to have an even more bullish outlook.

A look at Voxeljet’s financial statements and its low volume of machine orders could lead to extremely bearish sentiment. I have recently read and heard backyard analysts give price targets ranging from as low as $3 to as high as $70. Since Voxeljet released its Q1 2014 Financial Results on May 15, major analysts have given price targets ranging fromaround $12 to $17 per share. In my research, I found only one notable exception: on May 15, analysts at Cohen and Company gave a bullish $30 price target (down only $5 from their previous estimate).

Even guru short-seller Citron Research gave a price target of $12.09. Although this report was released when Voxeljet’s share price was flying near $70 in November of 2013, Andrew Left’s firm has already come within cents of reaching their estimate. Most shorts have covered since Citron’s report and a new tug of war seems to have emerged between bearish $12 and bullish $18 per share.

Voxeljet’s Share Price is Like an Undisciplined American Football Player

On Thursday, May 22, Voxeljet shares increased by 9.2% without any significant news. In fact the only news in the entire 3D printing sector that day was a positive note about demand for MakerBot desktop 3D printers, a product from Stratasys (SSYS). Voxeljet does not offer anything comperable to a desktop model.

An undisciplined American football player will jump offside at inappropriate times. Voxeljet shares are poised to do the same thing. Fickle investor sentiment should continue to cause Voxeljet’s share price to inappropriately jump in both directions.

Compared to 3D Systems (DDD) and Statasys, companies with roughly $5 billion market caps, Voxeljet only has a $250 million market cap. 3D Systems is more than 22 times as large as Voxeljet. Stratasys is over 18 times as large as Voxeljet. This helps explain why Voxeljet represents a better opportunity to capitalize off of sector volatility than its peers.

Voxeljet vs. Sector Peers


Market Cap(as of May 27, 2014)

Average closing price (last 30 days of trading)Standard Deviation(last 30 days of trading)3D Systems$5.6 B$49.512.44 (4.93%)ExOne (XONE)$397 M$30.653.49 (11.39%)Stratasys$4.7 B$95.404.85 (5.08%)Voxeljet$254 M$14.801.20 (8.11%)

The table above includes all trading that has taken place since Voxeljet’s price settled after issueing its secondary offering at $15/share (the actual offering was issued on 4-8-14). ExOne has experienced even more drastic deviation than Voxeljet.

The chart below reveals that Voxeljet’s share price has remained close to the $15/share secondary offering. The other three stocks do not show this consistency. Voxeljet seems to be the only stock in this group with a pivot price.

VJET Chart

VJET data by YCharts

VJET Chart

VJET data by YCharts

A look at the chart directly above reveals why ExOne’s share price deviated more than Voxeljet’s share price. ExOne’s share price has yet to settle.

Why not play off the Volatility of ExOne?

I see Voxeljet as being a better investment idea than The ExOne Company for three reasons:

  1. Safety: Due to the fact that there was a recent secondary offering at $15/share and because their most recent earnings report met analyst expectations, Voxeljet looks less likely to plummet. ExOne, on the other hand, continues to disappoint.
  2. Volatility: Safety and volatility are not antonyms. I believe in addition to having a higher support level, Voxeljet will also have a higher standard deviation in the future. I believe that investors have more safety in Voxeljet, thus they are more likely to purchase its shares in times of 3D printing momentum. Voxeljet has roughly half the market cap of ExOne, which further explains why Voxeljet should have more drastic overreactions in the short-term future.
  3. Half-truths of Hype: By no means do I believe Voxeljet shares are worth $70; however, I wouldn’t be surprised if they went back up to $35 within the next year. Based on recent performance and future outlook, I believe that Voxeljet is in a better long-term position than ExOne.

Risks, Concerns, and Questions

  • Is swing trading dangerous? It can be. This article is intended for people who are experienced in this type of investing. I wanted to present this idea as an opportunity for skilled traders to use their skills. I do not believe this is a smart “hold and wait” stock.
  • What type of strategy should be implemented? I am familiar with swing trading in theory only. I probably won’t try swing trading with this stock or any other stock until I have had more experience on a simulated platform.
  • Beware of panic and hype! Both of these emotions can be extremely dangerous with any small cap stock, but especially one as volatile as Voxeljet. Play by rules, not by news.
  • Should I take a short position once share price exceeds $18? Although from a statistical standpoint it is likely that Voxeljet would not be able to maintain a share price above $18, any major change in sector or company outlook could send it to a new pivot price. Bullish confidence has already sent share price to $70, so unexpected momentum should remain a concern for shorts.
  • As of May 27, 2014, Voxeljet had a market cap of $254 million. Of the five major pure play 3D printing companies, Voxeljet is not only the smallest but also the one with the highest P/S ratio (20.68).


Barring very bearish market news, I believe Voxeljet shares will continue to trade above $12. I believe that this relatively safe platform combined with the anticipated ups and downs provides a lucrative opportunity for savvy traders. I would not start a position at a price above $15/share.

I would not recommend Voxeljet for investors who are not willing or able to take quick gains; however, I would also recommend keeping at least a small core holding in case the stock has a breakout.

Disclaimer: Before investing in any security, it is wise to do your own research.

Additional Disclaimer: I have no position in VJET, nor do I recommend it for anyone who is not an experienced trader.

Disclosure: I am long DDD, SSYS. I wrote this article myself, and it expresses my own opinions. I am not receiving compensation for it (other than from Seeking Alpha). I have no business relationship with any company whose stock is mentioned in this article.

Themes: long-ideas Stocks: DDDSSYSVJET
*this was also posted on my instablog page at Seeking Alpha.

Update on 3D Angles

Thank you for visiting my 3D printing blog. I plan to update provide short updates on 3D printing news as well as Seeking Alpha Instablog posts and links to my Seeking Alpha articles. Soon, I will provide a list of all the 3D printing companies I am currently covering. Thank you for you patience. If you do not have a Seeking Alpha account, please sign up so you can read full versions of my articles. Sign up is Free! My published articles are:

Arcam AB:




Why Should We Follow Large Companies That Are Involved With 3D Printing

If you have had any amount of exposure to American stocks, then you are probably well aware of General Electric, Hewlett Packard, The Hershey Company, and Staples. What you may not know about these companies is their current and/or speculative involvement with the 3D printing industry.

I am going to try to keep an updated list of large cap stocks, both American and international, that are involved in the 3D space. I do not expect 3D printing to create an exponential boom in revenue for these large cap stocks (as they already have a large market share for their given industry). What I do expect to see long-term is very significant increases in profit margins because of how much money additive manufacturing or 3D printing will save during the production process.

I believe it is a positive sign (in most cases) when a company looks to 3D printing as a means of doing business. General Electric, for example, is using a variety of 3D printing applications for its jet engine production. I would love to hear feedback on this topic as well as any insights on other well-established, mid-to large-cap companies that plan on incorporating 3D printing or additive manufacturing.

3D Printing Stocks We Should All Be Acquainted With

Hello! Welcome to 3Dangle’s stock blog. On this page, we share our ideas on how to invest in 3D printing. Because many of the obvious pure plays have been overbought (as of the creation date of this post), it is important that we look outside the box for innovators in this world-changing space. I have a list of pure plays, mixed plays, small caps, and large caps posted above. This list is subject to editing at any given moment. Not all of the stocks that I have listed would I recommend buying; however, each one of them represents a company that I am currently watching closely for innovations related to 3D printing.